NXT Hardware Information Command Line in FreeBSD Switching between open source OSs can sometimes be confusing, since they may have different ways of doing things. A common task that may confuse some users when switching systems is getting hardware information. In the case of Linux-based OSs and FreeBSD, the following cheat sheet for figuring out how to do the same things on two different systems can ease some of the pain.
CPU and memory information
Because Linux-based systems use the proc device filesystem to provide access to information about hardware devices in the system, getting specific information about the hardware sometimes involves finding it in files using the grep command. The same information is normally accessed on FreeBSD via the sysctl command.
To get information about your CPU model . . .
Linux:
grep model /proc/cpuinfo
FreeBSD:
sysctl hw.model
To get information about total system memory . . .
Linux:
grep MemTotal /proc/meminfo
FreeBSD:
sysctl hw.realmem
Device listings
Information about many other devices might be needed as well. For these, each system has tools designed to provide listings of devices connected to various system buses.
To get information about PCI devices . . .
Linux:
lspci -v
FreeBSD:
pciconf -lv
To get information about USB devices . . .
Linux:
lsusb -v
FreeBSD:
usbconfig
To get other connected device information . . .
Linux:
dmidecode
This command shows DMI/SMBIOS hardware information.
lshal
This command shows all devices managed by the HAL subsystem.
FreeBSD:
atacontrol list
This command shows all ATA devices.
camcontrol devlist -v
Notes
Some of the above commands may work from a normal, unprivileged user account. Others may be restricted to root access.
On both of these OS types, a lot more information can be had by means similar to those described above. For instance, the /proc/cpuinfo and /proc/meminfo files contain a lot more information than just the CPU model and total memory. There is a sysctl command on Linux-based systems as well as on FreeBSD and other BSD Unix systems, but it is not as broadly useful as on FreeBSD, nor does it offer as comprehensive coverage of the system, because Linux-based systems default to other Means of Accessing and configuring the system configuration values \u200b\u200b(dry as the proc filesystem). On Either type system, a picture of sysctl capabilities can be seen by viewing the utility's manpage.
If you are feeling curious and have some time to spend exploring, sysctl-a sysctl outputs all information it has PROVIDE. Long
